| | | The control part, extending the idea of ALL IN ONE to this product, putting more control settings to LCD control panel, three control circuits in last generation, now integrated in one control circuit. 5V and 12V in old control circuit, in the new generation is 12V. It is not only reduces the size, but also unifies the old numerous and disorderly wires to several simple interfaces. The unified power makes sure the stability. | | The old three direct-current dynamo is changed to controllable stepping motor to control, with more reliable. It needs to open the cover to set up when the grating digital calibrates center in the old one. In the improved one, it can set up by the LCD screen on the rear panel. | The totally new separated design, perfectly separating the laser light path, circuit control, power driver and heat radiation.
Multiple pages of fan for heat radiation in wind path layer, 200 heat radiation to make sure heat interchange in laser, two sets of high speed heat radiation fan, one for inhaling, one for exhaling, taking away the interchanging heat. | | With CR-TEC original mechanical laser safety switch. When the image outputs less than +/-1.5 , it can turn off the laser light path in 0.1 second to make sure not appear laser light dot. With 1T high velocity intelligent chip, through complex arithmetic comparison, it can judge the security of laser beam. When the image outputs lees than +/-1.5, it can turn off the laser signal, double protection, double security. |
Intelligent switching for ILDA
After being connected with ILDA laser software, the device can automatically detect whether it is connected with the ILDA software. If it is correct, the device will switch to ILDA model, controlled by ILDA software. Also setting up ILDA output outlet, amplifying the input signal, making the connection spread unlimited. | Interlock, when there is any unexpected situation happens, all the electronic safety protection will be invalid, the interlock as the strongest line of defense. Operator would use interlock control to cut off power supply and turn off laser. | Professional laser safety lock, only the professional staff can turn on it, don’t use it without permission. |
Adopting 638 nm red light, with highly visible function value which is 2.8 times brighter han 660 nm red light. | DMX control grating switch
When the device connects to ILDA professional laser control system, the built-in grating switch function will perfectly combine with wonderful ILDA show by DMX signal setting. | Mirror image digital setting
Through touch button, freely choosing pattern’s X axis and Y axis mirror image’s direction. | Appearance design
Specially double colors design for some parts, detail interpret perfect design. |
|
